race ecm

[c818919]

Does Harley have a race ecm for 1125r.....so just Eric now?

 

[McMurphy]

Pretty sure just Erik. Even if Harley can get them, who'd want to give them the business?

 

[ATFIII]

^ I agree. Go to
http://www.erikbuellracing.com/store/models/1125r/1125r-preprogrammed-ecm-for-use-with-pump-gas.html and choose your exhaust from the drop-down list.

 

[tyler]

NOW ECM IS 305.00 WTF[down][down]

 

[anrkizm95]

NOW ECM IS 305.00 WTF

same for the xb ecms [down][down][down]

 

[d_adams]

Somebody's gotta pay for the dyno time I suppose. Glad I got a couple of them when I did.

 

[tyler]

how big can the market be only 8000 1125r motors i want the 3mm over pistons and rods have some one do the heads and im done rite....who has those parts,,,,[mad]

 

[d_adams]

Price increase is due to their costs going up from the supplier. Was a dollar for dollar increase on what they got hit with.

 

[Puzzled]

how big can the market be only 8000 1125r motors i want the 3mm over pistons and rods have some one do the heads and im done rite....who has those parts,,,,

Basic internet research found these companies. I delt with each and every one of them for my 1250 Rotax build. They all have first hand knowledge of the 1125.

CP Pistons/Carillo rods, Terry Stewart from Shaker Products is the rep for the 1125 stuff 714-398-7952.

Dan from Crower for the heads and cams, 951-296-9669 http://crowerperformance.com/i-5912878-buell-1125-rr-4-cam-set.html
Brian Nalin from Revolution Performance for the Heads, 920-892-2109 http://revperf.com/
Millennium Technologies for the bored cylinders, 920-893-4830 http://mt-llc.com/
Michael from EBR for the heads and ARP head studs.
Cometic for the head gaskets, 440-354-0777.

 

[tyler]

thank you.....

 

[Puzzled]

No problem.

When I first started my build there wasn't a whole lot of people who were willing to listen. With the help of Mike1125R and Michael from Ebr they got me pointed in the right directions. Terry from CP was excited to work on the project. Once I had him on board the rest fell into place. Granted I ordered a few parts out of order but it seemed to have worked out in the end. I'll get back to that build here soon as the weather turns and keeps me indoors.

 

[tyler]

what type of ecm do you use for your build??

 

[Puzzled]

I have the full adjustable EBR Race ECM. I went this route as the possibilities are endless with this thing. I use a function in the ECM to create a two stage rev limiter for my 8-9K launches (thanks Mike & Dan). It can be setup to activate my air shifter while killing the motor to complete the shifts. I currently still use a stand alone system for this.

 

[gaucher19]

for real I didnt want to give buell the buisness either,they are shady also