Rear peg setup issue

[SlickRidin]

So I took the only passanger peg that worked correctly apart to try to fix opposite side now I camera either side together. The one side is missing little spring and the little steel player other side has Goth the spring and player but can't figure out how it all goes together. Go ahead laugh I am.

Picture or detail description on how it goes together? Amy way to order steel plate and spring anywhere?

Thanks
Kevin

 

[SlickRidin]

Wow sorry guys that's What I get for using phone. The words that are screwed up are needing replaced with camera-can't
Player-plate
Goth-got

 

[Xb12sLt]

Here's a picture of the plate placement for the passenger peg.

Put the spring in the little hole in the peg, then put the ball on the spring. place the plate over the ball and put it together like this

Push it the rest of the way in and put the pin thru the top of the peg and put the clip on the bottom. Hope this helps

 

[Xb12sLt]

From the bottom it should look like this when done.

 

[SlickRidin]

Wow perfect guys. I must have lost the ball. Anywhere to buy the player spring and ball? The ball and spring maybe hardware store?