Rear Signals

[24_7]

Finally got to put a few miles on my new xb12r today. Stopped to get gas and noticed the rear left signal was hanging out by the wires. Looked under the rear seat.. what the easiest way to get to the signal mounts?

 

[24_7]

No one??? I realize its probably something simple but from what I see the tail has to come off.

 

[dave_xb12r]

You'll have to take the seats off, then take the tail off. 4 screws on the bottom, 3 screws on top. All T27s. Good luck!

 

[racepro716]

Ya, it's pretty easy, most likely the nut on the inboard side of the mount came loose. Twenty min, maybe a half hour max. Wayne

 

[24_7]

You'll have to take the seats off, then take the tail off. 4 screws on the bottom, 3 screws on top. All T27s. Good luck!

Ya, it's pretty easy, most likely the nut on the inboard side of the mount came loose. Twenty min, maybe a half hour max. Wayne

Thanks[up] Of course out of all the Torx I have, i'm missing the T27.

 

[dave_xb12r]

You should have it in your tool kit under your seat

 

[24_7]

Damn it... don't tell anyone

 

[fahren]

Life on a Buell w/o a T27? Not much access to anything at all w/o one!