replacing clutch cable ?????????????

[TXgold]

weres a good place to buy a clutch cable mine snapped and i want to fix it asap anyone have advice??

 

[anrkizm95]

http://www.americansportbike.com/shoponline/ccp0-prodshow/17096.html

 

[skinner]

american sport bike.com or your local hd dealer same price i just had to replace mine not to difficult any questions just ask.

 

[firefighter1c57]

You sure it's the clutch cable?

 

[konarider94]

be careful threading it into the primary cover. the ferrule is prone to breaking if you over tighten it. make sure you get a new o-ring for the ferrule and you should have no trouble getting it to seal without cranking it too tight.

 

[snrusnak]

Might check ebay too. I just bought a new old stock brake line for CHEAP.

 

[Lesley]

be careful threading it into the primary cover.

This can NOT be said enough. Make sure this is the first step on the install also. Lay that cable on the ground along side the motorcycle in same direction bike would roll. Be patient and take your time. DO NOT get in a hurry. Good luck [up]

 

[TXgold]

ok thanx so much forall info ,, yes im sure its cable it snapped at the lever ,,, when u say lay it straight along bike you just have to make sure that the cable doesnt twist right? ? ? so in install try to not twist it? is there a thread on DIY