• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Slop in kickstand?

Buellxb Forum

Help Support Buellxb Forum:

Draxsonimy

Well-known member
Joined
Oct 27, 2011
Messages
465
Is there supposed to be some slop in the kickstand? Or is this a sigh the pin is about to go?

04 12s with orginal kickstand pin not upgraded one.
 
a little from normal wear and tear, but if it is not upgraded, I would change it just for piece of mind
 
Lean it up against something and take the bolt out. There is some slop in there, but it would be kosher to check, and not come out from somewhere and find yer scoot layin on it's side. Mine was leaning at different angles all the time. When I checked it, I just pulled the bolt right out. Threads were broken off the end. Check it pronto! My .02.
 
The bolt may be loose as well, mine backed off every couple thousand miles almost completely and I had to thread it back in. Finally got nervous enough and upgraded to the pin.
 
Back
Top