Parts:
Oil/Air Seperator from Harbour Freight - $5
5/8" tee fitting - $2
3' of 5/8" transmission line - $6
Male NTP air hose fitting - $1
structural zip ties
Fit the air hose fitting to the in end of the seperator, and then follow all the other walk through on how to remove your airbox.
Rotate the hose coming off the rear cylinder pcv valve towards the throttle body. Trim ~ 4" off the end of the front cylinder hose as well as the braided sleeve.
Connect the two hoses to the tee fitting, and snake the new hose from the back of the bike
In the above picture the only problem is that the fuel overflow tube/ exhaust valve cables need to be on the inboard side of the hose.
Slide the extra braided sheild over the hose from the back, and zip tie the hose to the tail section frame. The hose need to hang under the frame to let the tail section fit properly.
Snake the final section of the hose so that it comes out behind the left heel gaurd. Shove the end of the air fitting on the seperator on to the end of the hose. Zip tie to fit for the location.
Zip tie all the fittings, and youre done.
Oil/Air Seperator from Harbour Freight - $5
5/8" tee fitting - $2
3' of 5/8" transmission line - $6
Male NTP air hose fitting - $1
structural zip ties
Fit the air hose fitting to the in end of the seperator, and then follow all the other walk through on how to remove your airbox.
Rotate the hose coming off the rear cylinder pcv valve towards the throttle body. Trim ~ 4" off the end of the front cylinder hose as well as the braided sleeve.
Connect the two hoses to the tee fitting, and snake the new hose from the back of the bike
In the above picture the only problem is that the fuel overflow tube/ exhaust valve cables need to be on the inboard side of the hose.
Slide the extra braided sheild over the hose from the back, and zip tie the hose to the tail section frame. The hose need to hang under the frame to let the tail section fit properly.
Snake the final section of the hose so that it comes out behind the left heel gaurd. Shove the end of the air fitting on the seperator on to the end of the hose. Zip tie to fit for the location.
Zip tie all the fittings, and youre done.
