Switch for right handle control unit?

[hendro]

Anyone out there know if there is a Buell or Harley stock or aftermarket toggle switch that can be installed into the right handle control?

I have speakers installed with an amp under the seat but need to be able to switch it on and off when i want.

Currently have a switch just behind the seat but its hack.

 

[kdub627]

dude, wow I just happened to see this today on mine and was wtf...lol

Would love to know as well..

Thanks!

 

[Ranger3987]

I beleive there is or was once a way to set the blinkers up with a switch on both sides Im sure you can find a toggle that will work either way

 

[jimijeans]

If you can find a way to easily remove the small square plug first to see if theres enough room for 16 to 18ga.10/amp soft wires .The kill switch above it one just like that should fit into the square dead area for what you need. Maybe, a trucking company-Quality Wise)or Napa may have that.The part is fragile so take your time working on that.Make sure to use the proper size wires inside or it will start to split apart from to large a wiring size inside.Otherwise it could press on the wrong part inside and maybe Enguage the starter by accident. I would buy a new one and install that while you figure out the best available way to do the one removed so if a OPPS happens you can still ride and work on your project. That whole start/kill assembly part is only about $34.to $41. or so bucks anyhow.Good luck.~Jimi[up]

 

[smith2307]

not sure if you can order the switch separately or not, but that's where the switch for the heated grips on the Ulysses goes. there's a pic of the switch here

 

[jimijeans]

Thanks smith,been so busy w/ the Memorial Day with my Dad, Had to go to the Shop Today briefly so Here is the Part number on that #N0158.5AA I hope that number is still good. Several of our customers have the Ulysses And I must have had a Homer Moment, cause about an Hour later I went [Dooh]!Oh man a friggin Ulysses has one already built in for Heated Grips. More than likely you could purchase the unit, I don't know if the switch could be sold as thats all you need Knowing Harley Davidson it will be sold as the whole Start kill and Start button assembly,the cost well most of the time you'll spend a C note OR as my uncle says a $100.buck to walk in the door.Maybe shop around ebay or something. A bolt on would be easy and the wiring pigtail is already on it.OR a least it shows it in my parts manuals exploded view that way. Good luck.*Jimi [smirk]