• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

thinking about sell my 90ci race buell, or trading for a ducati

Buellxb Forum

Help Support Buellxb Forum:

T

Tyler Oxton

Well-known member
Joined
May 19, 2010
Messages
368
6912_20110412124730_L.jpg
\



well its an 04 xb12r just turn 4000 miles.bike is in waco,tx. really looking for trade on ducati but possible sell too if u offer right thing

Motor: 90ci kit, ported and polished heads, handbuilt race exhaust,race ecu, its a beast. prolly 130hp 120ft lbs.

Suspension: Penske adjustable rear,stiffer internals on front.

Other stuff: 1st gen prototype chain conversion kit, sato racing reasets, sharkskins full fairing, stock tail set up, and im prolly forgetting some things.
6912_20110412125357_L.jpg
 
it was the first gen of swingarm and chain conversion that came out of erik buells race shop. basically was a prototype.
 
i havnt had any cooling issues with it. it just like any buell if you sit still long it gets hot. and the motor work was done at central texas harley. they did it so i dont have every specific on the motor. there used to be a 90ci kit that was made that used millenium cylinders and thats what is on. besides that i dont have much details
 
streeting now. but was originally tracked for a season. everything is still wire tied even. im trying to feel out interest right now. $7500 or trade possible is what ill prolly ask. just feeling now
 
Also, what is it using for an ECM? Im assuming it was tuned outside of a buell race ecm at some point.

Only asking these questions because I am interested :)
 
transmission is stock just put in better clutch plates. and the race ecm is tuned to run the increased displacement. bike wouldnt run without it. it really does need a good dyno tune to get the most out the motor though. just havnt had time. this wasnt my first buell and this thing is ridiculous. part the reason im mulling over selling it
 
oh the im not sure exact size but the sprockets arnt stock. they are smaller to increase the secondary gearing and therefore along with more power increase top speed
 
The filler space on the swingarm is for added strenght. The exhaust is Beson Racing exhaust. Buell Racing sold a few years ago to race license holders only. Its a stainless system and the best out there.

Can you email me at [email protected] I would like to know a little info on the 90 inch and horsepower numbers. I acutally have the same setup.
 

Latest posts

Back
Top