Tuner gods! I have a ecm???

[dakotav8]

So, long story short. Ecm cracked and i glued the case together. The bike had and still has a sensitivity to tempature at the ecm. My question is what ecm do i need to look for? I have an 08 xb12x that is bue2d. Or so says my tunerpro and it has y0152.1am 07163 on the label. Thanks!!!

 

[ReadyXB]

You need either the Y0152.1AM or Y0152.1AMA. Unless the seller can tell you, expect a used one to come with anything from BUEOD to BUE2D. There were six or 7 different code revisions between 2008 and 2010. As you may know, each one has a different layout. But unless you have a custom map in yours, it won't be a problem; just use the stock image that comes in the new (used) ECM.

Yours is the first 2008 Y0152.1AM ECM I have heard of that has a BUE2D firmware level. Was that a H-D dealership update?

 

[dakotav8]

Thanks for the info! Ive only had it a few months. The hole time ive been chasing problems so I dont know when it was reflashed. I have found some listed for 1125. It sounds like I just reconfigure my turner pro and go.

 

[ReadyXB]

An 1125 ECM will work, but in that case, the eeprom image WILL need to be reflashed. Depending on the firmware level in the ECM you buy, I'm fairly confident we can help you find a matching stock XB image to flash in!