• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Uly upgrades

Buellxb Forum

Help Support Buellxb Forum:

wally

Well-known member
Joined
Mar 31, 2011
Messages
632
Location
Bellville, South Africa
Hi guys, been fairly quiet. For the most part because of work, but also since Uly has been riding like clockwork.

I was fortunate to attend an off-road training course, which my wife got for my birthday.

The guys from Country Trax train the BMW riders as well as the BMW trainers. Learned a whack load, pushed some boundaries and survived!

Uly took a few knocks - tipping over on grass area where we were practicing throttle and clutch control along with body positioning.

Right indicator lenses broke, along with clutch lever and punched through wind guards.
13BFDD65-F943-410B-B81F-405402C2CDBC_zps1skdrd0c.jpg

7ED60174-030E-44F6-8D83-423F82D01B6D_zpse9wziiml.jpg

E52ADC8D-91F1-4A6D-A9B0-178A70356F92_zpsb1shttmm.jpg

4BD24278-137E-4264-8449-217D5D56AC71_zpshclrwwzo.jpg

3CD0BD29-23FD-4240-8F6A-C2FB03E17F98_zps4d5ciabo.jpg


So I am thinking of doing some much needed upgrades.

Ordered some two finger folding levers. Looking at shorter LED indicators.

Also looking at proper reinforced hand guards and better handlebars. Any suggestions for these last two?

Uly performed flawless. Oh yes, also swapped out my XT suspension for that off a X model.
What a huge difference it makes!

Loads of looks and questions on the day. 😁

Thanx guys!
 
Moose Racing or Enduro Engineering are the toughest, little less room BUT they don't bend. Fastway, Cycra or the all plastic ones Acerbis will bend pretty easy, especially with a 400 lb bike. To get good bars you have to get new bar clamps to raise and except 1 1/8 bars. What year Uly are you riding.
 
Fitted front LED blinkers. Couldn't get LED relay to work. Upon studying the wiring diagram, I realised the positive and negative terminals are swapped around on Buell. Sorted now.

Bark Busters arriving tomorrow.
 
Replaced my busted header with one from a Firebolt. It actually fitted!

And using a borrowed Buell race exhaust in the meantime till I get my one fixed.

DF3AC507-C869-40B5-97D1-D95870977CDB_zpsvynpfyfr.jpg

8ADE1E3F-7846-49C2-B228-2FC24EAF8328_zpsc72vzrzk.jpg


Barkbusters are fitted. Will snap some pics tomorrow.
 
Back
Top