very frustrated need electrical help

[migs16]

ok so i changed my coil, checked all the wiring harness till it goes to the ecm and nothing is messed up.

the only problem is since i have a low seat on my bike it sits right on top of the ecm and all the wires are getting smashed and so the power wire that powers my coil keeps getting shorted and sets off trouble code 24/25.

Ive done every test and im 98% sure its messed up where the wire goes into the ecm because when i gun it and the bike shakes like crazy the trouble code goes off. when the coil doesnt get power then the injectors dont get power and everything is all bad after that.

i really need help with this has anyone has this problem??

 

[anrkizm95]

wires can break inside the insulation and not be visable also check the pins on the connector for the ecm they can become splayed and not make a good contact a bad coil ground can also cause those codes not just the power

 

[migs16]

alright il check the ground. and see if everything is in place.

anyone else have advice?

 

[Jobe Zeebuh]

Try using a different ecm. Then you will know if that is your problem or not.