WB o2 Guage mounting solution

[jammer84_03]

As the topic says, im trying to see what all options you guys have come up with for mounting your Wideband o2 guages.

I am running the AEM UEGO unit and it is an all in one unit.

I plan on adding a bung in the other section of exhaust and having another sensor in there so I can tune the front and rear cylenders seperately as I know the rear runs a different fuel map due to it being hotter.

Mainly I just want somewhere I can mount the guage without it being in the way and not something that will be 100% permenant.

Lets see what you guys got!!!

 

[loose1]

Here's how I mounted my narrow band. I made a u shaped bracket out of alu. and used the old mirror mount.
Matt

 

[snrusnak]

loose, your bike wants it's oil changed! lol

 

[Sirius815]

I've been pondering where to install a gauge myself and I think the best solution (IMO) is to put it where the left fuse/relay box is beside the gauge panel. I simply flipped the box upside down and ziptied it. I still need to actually get the gauge, but it should fit easily in that spot using a round clamp and the bracket that holds the original box. Hope that makes sense.