• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

What should I add to an XB12R?

Buellxb Forum

Help Support Buellxb Forum:

pm8675309

Active member
Joined
Sep 16, 2013
Messages
39
I added a K&N filter, exhaust wrap and a drummer exhaust.

I have seen people add a left handed intake, race ECM's, cams, etc.


What should I add for the greatest ROI? (No emmisions concern in PHX now)
 
Looks like your're looking for mainly performance mods... Not sure what you mean by "left handed intake?" A "right side scoop" will keep the bike (and you) cooler for around $50-60. You should look into a tune for the Drummer. Some have gone to XB9 primary gearing for more low end. Depending on how/where you ride, you might consider that?

You can check out our site. At this time, we don't have any performance mods for you beyond what you already have unless you're looking for a better brake rotor but you might see something you'd like to have. Our crash protection products have some of the best ROI for those that have been unfortunate enough to use them. ;)

PS - Welcome to the forum...Start an intro thread to tell us a bit about you and your bike...Pics are a must! :p

5-0dro
www.5-0dro.com
 
Air box delete is a cheap mod that offers more air to your motor. Few ways to do it. You can do it the old fashioned way and cut it yourself or by a airbox delete kit. Either way a fun little project.
17334_20130829101257_L.jpg
 
Your one of the lucky ones that actually had a true ram air. Mine the frame is sealed off. I get air through a 1/2 inch hole above my gas cap.
 
Thanks everyone. I will get some pics and start an intro thread. (Also, I meant right had scoop. All the kits have have seen are a pain to install and expensive)
 
Also, I meant right had scoop. All the kits have have seen are a pain to install and expensive

The OEM scoop from the Uly Comfort Kit is easy to install and is extremely inexpensive. It just doesn't look as good as some of the more custom (and waaaaay more expensive) ones out there. Bang for your buck-wise...It has it nailed! There's a thread on here somewhere about it with all the part numbers you'll need. here's what it looks like on my bike:

3525_20120509150532_L.jpg
 
Just added my rss, runs great. Less fan run time. Seems to cool that back cylinder very well. Also very pleasing to the eye
 
Back
Top