Where is the torque???

[Junkbone]

Air Fuel Value. You said that these mods were done before you got the bike. So with the K&n and hawk exhaust it should have had a tps reset and race map installed. You could try redoing these things to be sure they are done right.

 

[RuiP]

dude its not the bike that's the problem. I could pull a wheelie with a blast. Lean back and grab a hand full of throttle and the wheel will come up.

 

[Junkbone]

My bike is bone stock with 5k on the odo and pops a little through the intake when blipping the throttle. Also, I think they all pop through the exhaust on decell only you hear it more with the opened up pipe.

 

[snrusnak]

That's what I meant, since you don't know the bikes history do a TPS reset and AFV reset. Recheck timing(only takes a minute) and go from there. It's a good idea to reset TPS and AFV every so often anyway.

 

[bobaganoosh]

Try sitting back on the seat a little farther

 

[RuiP]

Im pretty sure if you diddle the flux capacitator a bit, the extra 1 HP made at 7100 rpm will definitely help you to wheelie.

 

[rusty2004xb]

aww yes...the flux!

 

[Stillonit]

i did a good wheelie without clutching it in second no problem..I hammered down thru an intersection and accidentally kicked up on the shifter at about 6 grand and she stood straight up like NOW..I just wonder what the people thought ha ha

 

[BurtonXB12R]

Easiest way for my 12r is to blip the throttle then when the shocks unload just pin it and modulate the throttle from there. Or to nail it from a stop n when you click into 2nd it should come up and go down pretty smoothly and all on its own. Itll ride it out for little bit too.