WTB LSL steering damper for XB

Buellxb Forum

Help Support Buellxb Forum:

Whatcha end up getting? I have an LSL. The GPR ones are gorgeous but on the Lightnings stick up high (above the bar clamps) and wouldn't work with my new fat bars and fat bar clamp. The other outside frame ones inhibit the use of the right side scoop That I just bought from you), so the LSL it is.... its sexy, tucked up tight, only down side is I can't do the SCG fork and shock swap I wanted to do.

~Mike....
 
I got an LSL for the exact same reasons as you (including the fat bar)
now I just need to figure out the install through the front isolator. I got one used so I don't have any instructions. and I cant look at my bike right now because it is still in the shop getting re-aligned from after the wreck.
 
thanks Mike they will be a HUGE help :D[up]

I wish I could rep point you but the system is still down [mad]
 
Yours?
Is it the active model?

If yes to both I would need dimensions off of it to see if I can mount it where the LSL lives with the LSL brackets
 
The damper in the youtube vid is an LSL, not a HyperPro. The only image of a HyperPro on a BUell I could find is this:

http://www.trojan-horse.co.uk/prods/131.html

^that one mounts where a RSS would be, but the one in the eBay auction is awefully short for that type of mounting. My bet is it mounts in FRONT of the lower triple clamp, but I don't know for sure. I really wanted one that mounted like this, but only seen it at Hill Billy and I think it was extremely pricey.

~Mike.....
 
yea +1 on the youtube vid the ebay guy posted being all wrong, LSL for sure

via the hyperpro site (also what trojan used for a picture)
Buell%20Gun%20Metal(2)ws-1.jpg
 
Back
Top