WTB/WTT - XB12 primary gear swap

[Ovaltine]

Looking for the factory primary gear (38-tooth?) and chain for an '08 XB12 Ulysses.

I recently bought an 08 Uly that has the xb9 primary gear in it. I'd like to take it out and go back to the xb12 gear (and chain).

 

[drumnerd33]

You dont like the lower gearing?

 

[bwylie_99]

I have an 05 xb12s. If their compatible I'll swap you

 

[Crimson04]

I would gladly buy it outright but I would like to keep my 12 gearing.

 

[EricZ]

Only 2008-2010 models will interchange the front primary sprocket as the crankshaft splines are different.

 

[2004xb12s]

If I may ask do you know what the top speed is with the xb9 gearing and also what the rpms are like around 75mph

 

[greasyxb9s]

My xb9 runs around 4500 to 5000 rpm at 75

 

[50dro]

My xb9 runs around 4500 to 5000 rpm at 75

Your pulleys are different than the 12 though...or at least the rear is. Not 100% sure on the front.

 

[EricZ]

The XB9 (except 2003) and XB12 have the same pulleys and belt for the final drive. The only difference between them is the front primary sprocket and primary chain length.

 

[Tbone]

My initial impression was that the 09 Uly first gear was high. Now that I am used to it, it is great on pavement and in traffic. Ridden some gravel roads and it did pretty good, but I imagine to get off road on the trails, climbing, descending, switchbacks, etc.... a lower gearing would be a great advantage?