HID / dual head light wiring

breeves · Apr 11, 2011

I am looking into this mod for my bike. I personally don't like the fact you have to use flash switch. So without knowing all the schematics of the multifunction switch, I came up with this schematic.

Can somebody look this over and let me know if this would work?

breeves · Apr 27, 2011

HID's are on the way. When i get them i will report on this.

Sirius815 · Apr 27, 2011

You can avoid the third relay on the right by letting the high beam switch go into the low beam relay, but you'd have to put in a diode so that you don't trip the high beam relay with the low beam switch.

VT2MA · Apr 27, 2011

http://www.buellxb.com/Buell-XB-Forum/Buell-Lightning-XB12S-XB12Ss-CityX-XB12Scg/HID-Time-Delay-Mod

I also made a vid on how to install with the timer relay. Youtube's blocked at work, but just search buell hid install and it should come up.

breeves · Apr 27, 2011

I dont have any diodes handy nor do i know how to calculate the correct size needed. What i do have is several relays handy. Thanks for the heads up, i will look into it.

Ailen Xb9 · May 15, 2011

viji88 · May 21, 2011

@VT2MA

just use proxy sites. Try proxies like from http://proxy-zone.net or add https before the link..

)

HID / dual head light wiring

Help Support Buellxb Forum:

breeves

Active member

breeves

Active member

Sirius815

Well-known member

VT2MA

Well-known member

breeves

Active member

Ailen Xb9

Well-known member

viji88

New member

Similar threads

Latest posts