I have a 2005 Buell Lightning that was stored while I was deployed. My father had it taken in to have the belt changed and they talked him into putting a power commander on my bike. I haven't been able to locate the power commander. My bike is running horrible and I need some help getting it running correctly. I reset the TPS and loaded my old maps I had made for me for my new exhaust and it smoothed the bike out and it will not idle but I am lacking power now. I am located in Tacoma Wa if someone is close and would be willing to give me a hand.
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
05 Buell lightning help
- Thread starter Varner
- Start date
Help Support Buellxb Forum:
squidbuellie
Well-known member
- Joined
- Jan 26, 2011
- Messages
- 2,048
I would locate and remove the power commander. On xbr's they try to put it up under the the right side of the stay, but I have also seen them tucked into the right side of the rear pod. On the xbs's it is most likely under the seat.
Or you will just have to chase the wires you will have two to the battery and one to each injector.
I'm also assuming you have ECM spy so.... After your done removing the power commander just flash a tune on your ECM.
Or you will just have to chase the wires you will have two to the battery and one to each injector.
I'm also assuming you have ECM spy so.... After your done removing the power commander just flash a tune on your ECM.
Similar threads
