Ive had this bike for a couple years and the Hibeam has never worked but the lo beam works fine. Decided to replace the bulb this spring and found that the bulb wasnt the problem. When I attempted to turn the hi beam on with the new bulb installed the hi bean indicator no longer would come on. The indicator had worked previously. I pulled the light fuse to check it and reinstall and found that the indicator light would come on, but would go out as soon as I plugged the blub in and would stay out until I pulled the fuse. The dim marker light that sits between the hi beam and lo beam bulb also went out both times along with the indicator. Anyone have any Ideas, Im stumped.
03 XB9S No High Beam
- Thread starter Diesel712
- Start date
Help Support Buellxb Forum:
Sounds like the wrong bulb.
And I would check if someone botched the 'both lights on with Hi-beam mod'.
And I would check if someone botched the 'both lights on with Hi-beam mod'.
Barrett
Well-known member
The dim marker light that sits between the hi beam and lo beam bulb also went out both times along with the indicator.
Main clue. Euro-spec only "running light" not traditionally active on NA 2003 models. Headlight assembly wiring harness probably fiddled with by some near-do-well.
CORRECT HARNESS FACTORY APPLICATION:
BLACK---COMMON GROUND
YELLOW---LOW BEAM CIRCUIT
WHITE---HIGH BEAM CIRCUIT
ORANGE---COMMON POSITIVE FEED FOR EURO-SPEC RUNNING LIGHT
H7---CORRECT OEM BULB #
I would check to make sure the bulb is correct. Also make sure the wires in the headlight/harness have not be rearranged/modified.
I would do exactly as 34:19 recommends
34nineteen is probably right.
And so is 34:19.
34:19 approves this message.
"Let there be light!"
-34:19
-34:19
Was the problem the wires being switched around OR a poor fit between the fuse and receptacle?
