Hi,
My 08 xb12ss is being a little funny when riding.
I recently replaced my VR and exhaust actuator, and since then my bike is weird. I had done a TPS reset and went for a ride for the bike to learn. The bike was great for a while, in fact it seemed to have heaps of pick up through the whole rev range. I have tested and adjusted the exhaust act. As per manual.
Sometimes when I start the bike it runs perfect, sometimes it stalls. When I'm riding, there is a noticeable lag in torque from 3k to 5k (sometimes). I know this is not normal because it has been great until recently. There is also a struggle to take off at the lights without giving the bike heaps of revs. The problem seems to be worse when it is warmed up.
I have done a datalogging session and TPS looks ok. I have been told the AFV should be 100 and it was only at 74. Would this be what is affecting the bike? Can I change the value in tunerPro RT? Any help would be appreciated because I just want to be able to ride it.
I have the datalogging file if that will help. Sorry for the long post.
My 08 xb12ss is being a little funny when riding.
I recently replaced my VR and exhaust actuator, and since then my bike is weird. I had done a TPS reset and went for a ride for the bike to learn. The bike was great for a while, in fact it seemed to have heaps of pick up through the whole rev range. I have tested and adjusted the exhaust act. As per manual.
Sometimes when I start the bike it runs perfect, sometimes it stalls. When I'm riding, there is a noticeable lag in torque from 3k to 5k (sometimes). I know this is not normal because it has been great until recently. There is also a struggle to take off at the lights without giving the bike heaps of revs. The problem seems to be worse when it is warmed up.
I have done a datalogging session and TPS looks ok. I have been told the AFV should be 100 and it was only at 74. Would this be what is affecting the bike? Can I change the value in tunerPro RT? Any help would be appreciated because I just want to be able to ride it.
I have the datalogging file if that will help. Sorry for the long post.