2010 XB-12scg 4500 miles. ++Perfect++

[oh9bolt]

08 - Later = Newer "Learning" ECM's & upgraded Oil Pump Gear.
(Some '07s will be included in the "Post '08" category. And the "Learning" ECM's will generally only compensate for either an upgraded intake OR exhaust. They have trouble with both and may require a custom map just like the earlier years.)


2009 = ZTL2 8 Piston Front Brake (XB12 Models)

Black frame, engine, and forks.

2010 - Current =
- Fuel pump & fuel pressure sensor similar to the 1125's.
- Front & Rear New style LED turn signal.
- LED Tail light
- 30mm rear wheel bearings
- 3 bearings and dust seals. (One bearing on brake side and two bearings on sprocket side.)
- New tools are required to remove and install the new bearings.
- Axle & Wheel hub changes due to the new bearings
- Front Cylinder O2 sensor has been added.
- Wire harness changes. (Addition of fuel pressure sensor wire and front O2 sensor wire.)
- For XB12R models, the rear sub-harness is now part of the main harness.
- Fuel pump break-out location change
- JST Connectors on tail light & license plate light.(XB12R ONLY)
- Updated oil check procedure
- New Fan logic driven by speed and temperature
- Battery tender connector built into harness

 

[ZDude]

That's a impressive list of difference. Thanks for the information.
Still wonder why the pipe was replaced with a Uly pipe?

 

[TPEHAK]

You forget that 2010 has new right side air scoop.

 

[swg5031]

08 - Later = Newer "Learning" ECM's & upgraded Oil Pump Gear.
(Some '07s will be included in the "Post '08" category. And the "Learning" ECM's will generally only compensate for either an upgraded intake OR exhaust. They have trouble with both and may require a custom map just like the earlier years.)


2009 = ZTL2 8 Piston Front Brake (XB12 Models)

Black frame, engine, and forks.

2010 - Current =
- Fuel pump & fuel pressure sensor similar to the 1125's.
- Front & Rear New style LED turn signal.
- LED Tail light
- 30mm rear wheel bearings
- 3 bearings and dust seals. (One bearing on brake side and two bearings on sprocket side.)
- New tools are required to remove and install the new bearings.
- Axle & Wheel hub changes due to the new bearings
- Front Cylinder O2 sensor has been added.
- Wire harness changes. (Addition of fuel pressure sensor wire and front O2 sensor wire.)
- For XB12R models, the rear sub-harness is now part of the main harness.
- Fuel pump break-out location change
- JST Connectors on tail light & license plate light.(XB12R ONLY)
- Updated oil check procedure
- New Fan logic driven by speed and temperature
- Battery tender connector built into harness

Just now seeing this, Thanks for answering that.. Bike is still for sale

 

[swg5031]

The pipe is as is from the factory, was not replaced..

 

[Iko]

Yup. 1st post eh?

Yeah..just for hunting the bike..

Just to let u know i came from other part of the globe and since the bike is still for sale so Im gonna need to talk with my friends about this. Anyway it would be great if you could provide more detail pic on the bike for my reference.


Thanks!

 

[oh9bolt]

That was a copy paste, Tpehak

 

[swg5031]

Yeah..just for hunting the bike..

Just to let u know i came from other part of the globe and since the bike is still for sale so Im gonna need to talk with my friends about this. Anyway it would be great if you could provide more detail pic on the bike for my reference.


Thanks!

Give me a call on the number listed in the Ad and we can discuss any questions you may have..

 

[Iko]

Give me a call on the number listed in the Ad and we can discuss any questions you may have..

A friend will call you to discuss this..

 

[Cooter]

Is your friend a Prince from Africa? Here in the states we love to cash other peoples wire transfers in our personal bank accounts, for a small fee of course. We can discuss shipping options later as I'm sure you are in the Military and on assignment. But only after we make sure to give you all our PayPal info first.

 

[Iko]

Nah..not that simple
Importing can be really hard here thats why i need some friends that understand procedures between the countries.

Anyway we are still discussing hope can sort something later on..

 

[swg5031]

Iko, I am not interested in shipping the bike overseas.. Too many variables and frankly I just don't trust you.

 

[Iko]

Its ok I understand.

 

[swg5031]

Still for sale.

 

[swg5031]

Price drop

Price has been lowered to $6K.

 

[byrdock]

PM sent

 

[swg5031]

Price drop

Need to sell. $5900

 

[buell248]

Need to sell. $5900

You are still asking retail, If the bike was sitting at a dealer with financing options, it might sell at that price, selling it privately you most likely will get $5000 tops, your "need to sell" price means you don't want to sell it.

 

[Silverrider]

^^^^^ :up:

 

[swg5031]

You are still asking retail, If the bike was sitting at a dealer with financing options, it might sell at that price, selling it privately you most likely will get $5000 tops, your "need to sell" price means you don't want to sell it.

You are welcome to your own opinion.. I've sold XB's for more than this in the past. Thanks for the input.