So I just brought home a 2007 XB12SS w/14k miles. It has a Jardine RT1 pipe. I noticed at the time I was looking at the bike that it has issues at the pipe, but I need to know what caused it. The front rivets have "wallowed" out the enclosed of the pipe so it's pretty much trashed. I can grab the pipe and the enclosure moves where the front rivets have pretty much eat away at the metal pipe enclosure wall.
Is there something else going on here that caused this to happen in the first place? I'm going to have to replace the pipe but could it have bad engine mount or something that caused enough vibration/movement to cause this? I sure as hell don't want to replace the pipe to have this start all over again. Maybe I just need to take it into a shop and get an opinion but thought I'd start here with you guys so ask your opinions.
All of the front rivets are like this.
Is there something else going on here that caused this to happen in the first place? I'm going to have to replace the pipe but could it have bad engine mount or something that caused enough vibration/movement to cause this? I sure as hell don't want to replace the pipe to have this start all over again. Maybe I just need to take it into a shop and get an opinion but thought I'd start here with you guys so ask your opinions.
All of the front rivets are like this.

Last edited: