Brembo Rear Master Cylinder

[OldGeezer]

Not a cheap kit, but not unreasonable. How is the new rod held in the master cylinder piston and how long is it?

 

[buellxb9rs]

I haven't measured the length yet, but it matches the stock setup and currently there isn't anything holding it in place but I believe I will implement a spring setup for it. Also the price can come down if 10 people can buy them I can save on shipping and the price can come down by about $10 each

 

[rrbuell]

I'm on board. Sign me up.

 

[OldGeezer]

I'll sign up too. Thanks

 

[OldGeezer]

Forgot to mention I want the new master and the Duc fork and pin as well. Thanks

 

[xlr8n_xb]

This is an awesome mod. Brake performance on my 05 XB12R went up by leaps and bounds over stock. I also switched to a braking wave rotor on the back. I had to splice the buell brake light switch with the ducati switch.because the threads to the top of the master didnt match. It was pretty straight forward. I have had this mod for 4 years and gone through a couple sets of pads. Well worth the money. All said and done i probably spent $300-350 to complete it. Also, I used the duc fork and pin. Best of luck to all of you guys.

 

[buellxb9rs]

RRBUELL ive got yours ready, sent you a pm.
If anyine else wants one let me kkow. Im still waiting on the new master to come in

 

[OldGeezer]

Sounds good buellxb9rs, looking forward to making this mod. Should work out well, riding season is almost over up here.

 

[Burts Bird]

If you are still looking for possible buyers I would definitely be interested in picking up a used master. I plan on doing the rear caliper mod soon

 

[buellxb9rs]

Ive got a used one done that rrbuell was going to buy I just still havent gotten a payment yet. If it falls thru I will let you know.

 

[rrbuell]

Pm sent