Buell XB12 2009 Force exhaust map

[reiss91]

I see that EBR offers a preprogrammed ecm flash for Force systems. Does anyone have this map or know where I can download it?

 

[reiss91]

I currently have a Hawk exhaust system with the factory headers. It has a custom dyno tune and they eliminated the O2 sensor. I can probably just swap the force system on with no O2 and itll run close enough but I would rather get the proper map and use the O2. I will probably have it dynoed anyways if I cant find the map.

 

[Cooter]

You can buy it from IDSpeed.

Why the heck would they not run an 02 sensor? That might be OK in a dyno cell that day, but really? I'd love to hear the 'theory' behind that.

 

[lowkey]

You can buy it from IDSpeed.

Why the heck would they not run an 02 sensor? That might be OK in a dyno cell that day, but really? I'd love to hear the 'theory' behind that.

Most likely they tuned closed loop to richer AFR for power and didn't want ECU to adjust, It's OK if a barometer is hooked up for ECU compensation instead.

 

[Cooter]

Seems like there are so many better ways to do that.

 

[lowkey]

Seems like there are so many better ways to do that.

Like they say "there is more than one way to skin a cat", agreed I would go wide band tune myself. OP have a look over this for tuning options http://www.ecmspy.com/tgv2/guide2.shtml and http://www.ecmspy.com/ug_mono/V1.1/userguide_mono.shtml#tuning

 

[reiss91]

Bike runs perfectly in all conditions other than the blip cough that a lot of buell owners seem to suffer from. I originally got the dyno tune to eliminate decel pop and they eliminated the o2 at the same time. I don't frequently leave sea level though but this summer I do plan on it.

I have decided I will be purchasing the Force ecm from Idspd.com and getting the Force system and adding the o2 back in. Hopefully I have little to no decel pop with this set up. Thanks for the input everyone