changing turnsignals on 04' xb12r

[fin28]

not really that mechanically inclined, but i have changed the whole front end on my xb12r with a six pack and a shit ton of googling, but i got two broke ass rear turn signals and wanted to know how much im diving into before i start taking stuff off...just looking at it, it seems to me like the whole back tail section needs to be removed...[confused] but im not sure....any direction on a video of someone changing turn signals or anything would be helpful....

 

[Zeroflat24]

Are you asking how to change the bulbs or how to replace the whole assembly? If its just the bulbs you need a Philips head screw drive and a new bulb

 

[12R_FIRE]

remove seats, take the rear plastic off, unplug turn signals, one nut on each turn signal to remove them. Cant remember the size of the nut, but it should only take about 10 min.

 

[fin28]

lol no man not just the bulb the whole assembly.....the turn signals broke right where the flex in the plastic is......i thing it was just really weathered...its the high side when its on the kick stand also...

 

[oh9bolt]

remove seats, take the rear plastic off, unplug turn signals, one nut on each turn signal to remove them. Cant remember the size of the nut, but it should only take about 10 min.

[up]

 

[fin28]

well thanks 12r_fire def took me like 5 minutes to do that...thanks for the assitance[cool]