Charging issue

[jbishop]

I have another Buell charging issue...

Bike is an 03 xb9s. It is not charging at all and I started running through the tests for the issue and have run into some questions.

On the voltage bleed test:

2 of the 3 pins caused the light to light.

This would indicate that it is the voltage regulator. However I went through with the other test and on the AC output check:

2-3 and 1-3 both had ~40v AC however 1-2 had ~2v AC.

Any input?

Thank you,

J

 

[jbishop]

Does anyone have an idea? Would I be safe just getting a voltage rectifier?

 

[ich]

common issue. stator grounded, replace stator. check resistance of stator wires against ground, has to be infinite, will be in the lower single digit range probably.

 

[jbishop]

So it should be 0 when I check the resistance and if it is anything other then 0 replace the stator?

 

[RT Performance]

Should be out of range.
Display like ol.
Sounds like a stator has a leg down

 

[jbishop]

Thanks guys. Looks like I will order a stator and get ready to open her up.