Chinese GSXR Levers Conversion Video by Dave

[dave_xb12r]

nice video dave but it says you are going to start with the brake but then your working on the clutch lever first.

I did that to make sure you're paying attention.

 

[konarider94]

I did that to make sure you're paying attention.

good answer

 

[BlackandChrome]

I got the firedragonbros levers. My experience:

- "red" adjuster tab is pinker than red
- I didn't drill out the part on the lever. I cut off the black plastic piece (didn't think to drill it out)
- Tape is a great idea! I got a couple of extra scrapes on my levers
- A regular hand file worked much better than the dremel
- I went a little heavy with the grinding and the brake lever is pretty damn close to the bar. At "1", the lever is usable. At "6", it's practically on the bar

 

[brandan86]

nice, cant this be done on a blast? i want some blue levers

 

[bobaganoosh]

my wife bought me these for christmas and i put them on today. mine went on with no modification just had to break the plastic peice off the clutch cable and i didnt file the brake side down at all and it works fine brake doesnt rub at all

 

[dave_xb12r]

Unless you bought the buell specific levers, you NEED to modify the brake lever. I know it doesn't rub, but it could lock up on you.

 

[bobaganoosh]

no i got the gixxer ones. i havent riden it yet but i rolled it around and it didnt rub at all. when i get a chance ill probley file it down just to be safe