CR 1125 exhaust

[hawk_performance]

This is Randy with Hawk Performance i do the mods on the XB mufflers. In 2 or 3 weeks i will be doing mods for the 1125R and 1125CR mufflers .

 

[Midnight82]

Nick/AZCRider - Lets set it up. I haven't been to Bisbee since I was a little guy. (I use that term loosly, I've always been a bit husky)

 

[Maskido]

AAhhhhhhhhhhh! I'm at work (24hr shift) & my gf just told me that a long package from Jardine just showed up. Patience is NOT one of my strong virtues. Counting the minutes til I get off in the a.m.

P.S. I do not like fat chicks. They sweat a lot & are expensive to feed.

 

[Midnight82]

Maskido - post pics once you get that bad boy on there.

P.S. - Fat chicks make the world go round. Their gravitational pull spins Earth on a North/South Axis. Read a book [cool]

 

[xtreme6669]

Hells yes! we're going! That date work for ya?

 

[AZCRrider]

Here are some pictures from the install yesterday. I can't believe how good the CR sounds now.

 

[03Firebolt9R]

That looks really good. Post up a sound clip if you have one. Also, if you hit "enter" after each pic they wont display side to side, they will go up and down.

 

[wyobuell]

AHH! Yes indeed, the FMF sounds brutal!! . . . . if only ohiosportbike folk were up to the task of putting a mac compatible program together [sad]

 

[popeye13433]

OK so im looking at getting the barker exhaust in the beginning you all say there is a discount i have searched but i cant find it on here and yes it did search. also i cant even find a dealer online other then barker them-self. i have contacted then in regards to military discount but no response yet. im kinda impatient though

 

[xtreme6669]

This guy sells them:

http://www.buellforums.com/forum/member.php?u=2789

 

[popeye13433]

thanks i sent him a message

 

[triple7]

So Barker makes one for the 1125 for about $400? I've been waiting to see what Hawk was coming up with for the 1125 but it sounds like a lost cause.

 

[popeye13433]

you can get the exhaust from barker cheaper then puzzled sells them on his eBay site. talking to Tim i think you need to measure your headers because sometimes the cr has different size pipe then the r does. he also said to measure both of them because one guy had two different size pipes

 

[d_adams]

http://www.americansportbike.com/Exhaust_Shootout.html

For those of you who missed this. Ten pipes, one bike, one dyno.

Top hp output in the test, 137.8 hp & 82.7 ft/lbs torque

stock output was 121.6 & 70

 

[JohnnyS999]

More attention should be paid the Keda-design exhaust by D Adams. Hand made best sounding pipe and design I've seen so far. You'll find a lot of talk about it on the Bad Bueller site, many happy customers too.

 

[ATFIII]

Lets not forget about Randy with Hawk Performance, there are tons of people who follow his products almost like a cult with exhaust for the XB's and 1125's for under $250 shipped!

 

[J_Undisputed]

More attention should be paid the Keda-design exhaust by D Adams.  Hand made best sounding pipe and design I've seen so far.

I have to agree. The Keda sounds effin' nasty. If I ever wind upgrading to CR from my bolt, it would probably be the first thing I looked for. The way it sounds, you'd swear flames and poison were shooting out of the back of that thing. Another feather in the cap of product lines for Buellers by Buellers.

 

[tater180]

I am not taking anything away from the other manufacturers but I couldn't be happier with my FMF. I couldn't ask for anything more from an exhaust.

 

[Puzzled]

http://www.buellxb.com/Buells-for-S...Aftermarket-Parts/Barker-1125-Slip-On-Exhaust

Here is a thread that starts right from when I stumbled across Tim Barker and the prototype right through to the exhaust shoot out and the 100th pipe I sold.

http://www.buelletinboard.com/forum...mance-Exhaust/page16&highlight=barker+exhaust

 

[Mr Dowden]

I'm sendind my exhaust to Randy at Hawk performance... I love the looks of the stock exhaust but don't like the heat on the back disc so I'm going with his other option of the split tip turn downs... should eliminate that while giving it a deeper pitch. At least thats what I'm hoping!