dave_xb12r
Well-known member
- Joined
- May 19, 2008
- Messages
- 6,470
I (or Buellxb) will continue adding these as I finish them
If you have changed a component like the ECM or fixed a problem in the bike, it is a good idea to take the bike for a ride to let it learn. After completing the steps in the video, ride your bike in closed loop (between 3000 & 3500rpm) for a good 10 minutes. Do not do any hard accelerations during this time. Give the tps time to learn the settings and adjust accordingly.
This one isn't by Dave, but still awesome.
1125 brake pad change videos:
1125r and 1125cr Oil Change Video
If you have changed a component like the ECM or fixed a problem in the bike, it is a good idea to take the bike for a ride to let it learn. After completing the steps in the video, ride your bike in closed loop (between 3000 & 3500rpm) for a good 10 minutes. Do not do any hard accelerations during this time. Give the tps time to learn the settings and adjust accordingly.
This one isn't by Dave, but still awesome.
1125 brake pad change videos:
1125r and 1125cr Oil Change Video