Did the catch can...need advice

[Luc R]

I got all done with the re route, but for the life of me I cannot find a place for the can. Is it me or should I buy a different catch can...

 

[netty2424]

I'm not saying yours won't work but I think you'd be better served if you reversed the order of your can/filter. You're essentially using gravity to draw the excess fluids down to the catch can. The filter provides a pressure release to help facilitate that fluid movement.

So in theory, you should probably have that catch can at the end of the tube.

In doing so, you can run it down behind the cooler. Here's a couple pics of my set up.

Not saying mine is right and yours is wrong, but I think it sets up better this way.

 

[Dingo]

hell of a Catch can!!! for one drop per 2000 miles...

 

[Dingo]

sorry i dont get this mod but... at least you should install something that fits Buell.. this Crap-can looks just freeking ugly to me...

maybe you can get something like this...?

http://www.ebay.com/itm/BUELL-MOTOR...Parts_Accessories&hash=item41659dfbdd&vxp=mtr

 

[netty2424]

I don't think Erik Buell would intend for someone to over charge a man $60 for a can simply because it displays an infringed logo. Furthermore, I prefer a clear can so you can see what's in it. As for it being ugly, it sits behind the cooler And the tubing is covered by a the left side scoop so it's really not noticable unless at the angle the picture was taken and while the scoop was removed for installation. But thanks for the input!

 

[07Bolt_SOvitt]

I had a catch-can similar to yours netty & it leaked like hell. Found this one, similar to the one dingo suggested but way more affordable.

http://www.bmikarts.com/item/Catch-Can-600815-6270

Just need to go to your local hardware store to find the proper fittings. It also mounts perfect,

 

[netty2424]

It looks good oh7bolt! I dont figure it would last forever being that it was just a couple bucks. It's actually a small fuel filter, I just took out the filter and thread locked the bolt I put in the bottom. So far so good! I don't get much fluid in the can itself, mine is more for the cleaner air.

I was close to mounting mine to that bar as well, but as dingo said, they aren't the prettiest little cans so I hid it!

 

[07Bolt_SOvitt]

Thanks! I definitely feel where you're coming from with the over priced $60 catchcan, gotta save $$ anyway ya can. Personally I don't mind the look of your can and as long as its functional who cares right?

 

[netty2424]

Yes sir! [up]

 

[SMUURF]

You don't even need a "can", just plug it with a bolt and drain it every so often.

 

[Luc R]

SMUURF, I like your idea. Mine looks ugly as sin, I'm gunna re do it in the morning

 

[jimijeans]

LucR glad to see you are unblocking the AirCooler scoop for your Oil cooler. There are many ways to do the reroute so check out the Mods Section to get some ideas if needed. There are also Videos here on the Forum as well. Everything a growing Bueller might need is here. There is lots of help here so take your time and enjoy learning your bike and the usefulness of being able to look up what is so cool about the Forum world. The Mods section also has other works for keeping your Ride up and Welcome to the Forum.*Jimi

 

[vtech007]

07bolt SOvitt, I also ordered a can from bmikarts a little over a week ago - looks like a quality part at a great price - but I went with the black anodized finish for a couple bucks more instead of the unfinished can. They called me the next day and said the black was back ordered but they were expecting them in soon. Question: with it mounted horizontally like that, how do the captured fluids drain out when you open the drain valve?

 

[Jzfn13]

Mine is set up similar to that, here is how I did it

 

[07Bolt_SOvitt]

vtech007- Its hard to tell but the can is at a slight angle mounted there on the bar. So far there hasn't been enough fluid buildup in my can to drain it, but I figure once its full enough it should drain right out. If not tho, its pretty easy to just take right off & empty. Definitely post pics of the anodized black once you get it!

 

[snrusnak]

No offense to anyone, but 99 out of 100 of these that I've seen on here look horrible. JMO, I guess.

I can't say too much, as I currently have a similar setup to most everyone here, but I am going to redo it. I hate how it looks, I think it makes my bike look like a honda civic si special edition spec v type R....

 

[Cherryskullz]

my catch can only cost $1.25 beat that lol ...i know cheapy choppy but its mine The cop did look at it a bit funny after my accident...

Before when it was RT's bike

 

[snrusnak]

I take back when I said "no offense"....I think I need to be offensive here... lol

I understand function over form, but come on....

 

[konarider94]

i ran a tube down behind the left side peg with a pet cock on it. i just open the petcock and let it drain sometimes. i have a breather in the under seat area, its all completely hidden

 

[buellbradski]

I ditched the catch can all together run the hose down behind the peg. Dont think its nececary ran with a petcock for a while then said fuck it whats the point ? Doesnt seem to be getting oil on my swing arm anyway