• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Ecm cable at eBay

Buellxb Forum

Help Support Buellxb Forum:

Hi, for the 2008 and later models, a data link cable is not needed to perform the TPS reset!

The instructions are:
1. Set the engine Run/Stop switch to Run
2. Turn ignition switch to the On position. Do not start the engine.
3. a. Rotate the throttle grip from fully closed...
b. to the wide-open position...
c. hold for 1 second...
d. then back to closed...
e. hold for 1 second...
and repeat steps 3b-3e for three times total, holding the throttle grip against each stop for 1 second.
4. Turn ignition switch off.
Be sure to fully open and close each time.

So it's [closed-open-1s-closed-1s]-[open-1s-closed-1s]-[open-1s-closed-1s] -> ignition off.

A diags cable is still a good investment, though. I sell those as well (as of today!).
 
and reset info also in your factory owners manual. do NOT perform the tps reset constantly as seems to be the rage with a few owners. the ecm must learn the new settings which takes approx. 50 miles of normal riding to attain.
 
Ready,

What's your EBay name? I am looking to learn more about ECMSpy for my 07Scg. I'm wondering if the cable or the Bluetooth module is the way to go.
 
i ordered that same cable. was having problems getting my computer to connect to bike, took the plastic off the end of the cable and found that the ground wire had broke off the board. so i soldered it back on and it works fine now.

program is pretty easy to use for the basics. i need to do more research on the actual tuning part of this.
 
Retrax said:
Ready,
What's your EBay name? I am looking to learn more about ECMSpy for my 07Scg. I'm wondering if the cable or the Bluetooth module is the way to go.
Hi Retrax, if you look under "Useful Links" on my profile page here, I have a link. Thank you!
Bluetooth would be more convenient if you have the means to communicate with it. FYI, I am building bluetooth cables as we speak.
 
If you're looking for a bluetooth module I sell them on ebay. A quick search will pull up my store
 
Back
Top