GOT MILKy white stuff!!!

[07Bolt]

bike sat for 10 months after fresh fluid service; now i get the milky white stuff seeping from the clutch hole. The clutch cable is def the culprit. prob the cable lube mixed with the syn3. everything out of case/trans was still like new syn3. [smirk]

 

[strmvt]

could be condensation as well since the bike sat for almost a year

 

[07Bolt]

yeah, it wasnt there until i removed the cable from the cover, so it musta poured out afterwards

 

[xtremelow]

Water/Condensation mixed with the oil/primary fluid will give you the milky look.

Check the clutch cable seal right on the primary as that is the most common spot for moisture to seep into the primary[up], also the mid point of the clutch cable where the two pieces bolt together is another trouble spot.

 

[BuddhaBuell]

also the mid point of the clutch cable where the two pieces bolt together is another trouble spot.

xtreme is right on the money, I've sprayed a little water dispersant in the rubber boot and used a black zip tie at the top so water does not follow the cable and work its way into your primary
[smirk]

 

[garyphantom222]

Yep,condensation from sitting for a long time,clean it up and change all oil.