Help!! 1125cr -09 PROBLEM! It won´t start!?

[Lemmel]

Hi!
I got a 1125cr -09. When I ride 3 days ago everything was fine, but today it won´t start. When I push the start button nothing happens, not even a click. Everything sounds normal when I turn the key but it won´t start. If i roll the bike it starts to buzz (a ticking sound) probably charging? The battery is fully loaded and no fuses are broken...
Anyone know the problem?

 

[RT Performance]

battery is charged and the display doesn't say enter pin?
bikes in nutral try pulling the clutch as well.
if neither of those work there is a good chance it is the contac's in the actul start button.
if you take the switch apart and sand the contacs it should fix it

 

[Lemmel]

that was a fast response
no pin..
I also thought it was the switch so I took it apart and cleaned it but nothing...
Anyone got a electrical manual?

 

[Speed3Boy]

Was there a resolution to this issue? I am having the same problem. Push the start button and......NOTHING![confused]

 

[kiwi1125cr]

Perhaps ignition relay or starter relay. KIWI [cool]

 

[craigsmoney]

Hi guys, new to this forum. I had the same problem with my bike. If I cycled the starter button a bunch of times it would catch and start.

I got home and started chasing grounds, and eventually narrowed it down to a loose wire on the starter solenoid. It is located under the rear brake reservoir under the seat.

I hope this works.

Keep the rubber side down.

 

[RT Performance]

other thing is the known for breaking a wire at the igntion switch do the headlights work?
That may on be common on the r models[confused]