HELP!! At the track now and the engine keeps dying

[nineronesix]

I'm at a track now right now and my engine keeps cutting out.

It's a stock bike with only the gauges removed. It's never been a problem before.

What it's doing: the starter doesn't always engage right away when I push the starter button. It's like I have the kill switch on. Generally it's only a second or so. It's never done that before.

I've checked all the grounds I know of. I've switch the relays around. Checked all the connections.

Any help would be great.

Thanks

 

[anrkizm95]

the year would help,is it missing,dieing,or just shutting off.

 

[freak2180]

Mabiee it has something to do with the cluster being removed.....

 

[nineronesix]

It's an 09.

The engine sputters a little bit at idle. The first session it just died. After I stopped it started right back up.

This last session it ran fine. And it started right up. Hopefully it was just a lose connection.

 

[anrkizm95]

try a tps reset it only takes a few seconds.

 

[bttrfngrz]

i would check your bank angle sensor, if need be by-pass it.

 

[nineronesix]

It's been running great. I think it was a relay. I switched the ecu relay with the acc relay. I'll see when the lights are back on if that was it.

I did check the angle sensor and it was fine.

Thanks for the help.