help me out

[Codeman0535]

My computer is being really homosexual and i cant download the manual, so if any of you can give me a step by step on how to change the engine, tranny and primary fluid in detail. I would be super happy if ya did thanks

 

[xtremelow]

Turn you bike on and start it, let it warn up to operating temp.

Then drain the oil and change the filter. Then add 2 1/2 - 2 3/4 quarts of oil to the swing arm, also slightly fill your oil filter before installing that.

As far as the primary drain the fluid and remove the inspection cover, which you can put back on with or without a new gasket but new gasket is recommended. Then add one quart of primary fluid to the primary.

If you are running a full synthetic oil you can use that in both the engine and primary.

 

[Stevenc150]

Codeman, if you want to post up you're email, I'll send you one. I've got the '03 & '05 Firebolt Service Manual and the '04 Lightning Service manual.

 

[Thaloc]

On a side note, ur primary drains right over ur exhaust outlet. No one told me that[mad]. Best thing iv found is some aluminum foil over the outlet.