Isolator replacement?

[marten1]

I have noticed a kind of weird vibration just before the bike reaches low idle. I am guessing it is the isolator, but I am still unsure. Can I get someone else's opinion?

 

[wolfo68]

Make sure there is no cracking in the rubber on the isolator.

 

[Route0766]

I feel metal to metal some times. I was thinking because the suspension setup was for a 150 lbs rider and I'm 180 lbs.
Ok, let's wait for the expert fellows.

 

[JOEL9]

Here is a visual of good and bad.......

also you should change your clutch cable guide to the new style. The wire ones are prone to breakage letting your cable melt on the front header. Looks like this...

 

[motoqueiro]

that isolator seems good, but in order to make sure you must not set the bike on the side stand, you need to look with the bike on it's wheels only

 

[XBBrad]

My isolator went bad, the olny time it vibrated was on decel. If you looked at it not running it looked ok, when I took the bolt out I could see a ring on bolt head where aluminum was hiting on decel.