Need HELP!! Please...

Buellxb Forum

Help Support Buellxb Forum:

kevinc6639

Member
Joined
Mar 11, 2012
Messages
8
OK, so I bought the ECMspy USB cable. I downloaded the software from the ECMspy homepage. I am trying to get it to connect with my computer, but the demo version only shows COM3. How do I get it to use the USB port? I am using it on my 2006 XB9R Firebolt. It has the stock ECM as far as I can tell. Pulling the fairing now to see what numbers are on the ECM. I have the ignition on, start switch on. It is saying "Failed to get ECM type from ECM:
A transmission error occured:
SerialLink.SendRequest() - Error: cable problem / data loop
Please check cable and power. Turn ignition and kill switch to 'ON' position before connecting." Any Ideas? Thanks for the help, I've learned alot just from reading other posts.
 
OK,I checked the wires in the TTL232 connector. They are all good (at least the connectors). The ECM number on my ECM is "Y0152 3AB 06072". Does anyone know how to check the connector in the bikes harness? What values should I get, which are grounds, etc. I would really appreciate any help.
 
OK, so I was hoping someone would be able to help with this. Is there anyone in the Colorado Springs area that has a cable, or the program? It still runs, and I did the "white wire mod", but the popping on decel is driving me nuts!![mad] Thanks for whatever help I can get.
 

Latest posts

Back
Top