new buell owner with missfire and missing some wires!

[needtospeed]

Hi everybody. Im new to this forum and to buells. I just bought an 05 xb12r with 10k on it. Im almost 100 percent that its stock. Anyway so I bought it with a missfire most of the time every once in awhile for a few seconds it will run good. So I put new plugs in it and it still was missing sometimes and popping at higher rpms. I checked and they where both getting spark. Not quite sure what I should start looking at next. U also got a few wires that where just taped in a ball near the left rear part of the bike. Along with this cable.

And then this cable that comes off the throttle near carb

Also missing some relays and fuses I believe.

any help on this would be great. Thanks!

 

[Negative]

I THINK That cable and plug is for the exhaust valve... If so you should be able to just remove it...

The second cable with the Allen head on it is the idle speed adjustment... And these bikes are fuel injected no carbureted...

The left side relay box is set up just like my xb9 is so I believe it's correct (provided the 12's don't have a relay that the 9 isn't set up with) ... I can't get a good enough look at the fuse box to tell if it's completely or not...


And welcome to the forum man!...

 

[rchuff]

Negative is on the money baby

 

[needtospeed]

Thank you guys much appreciated.