New Dash!

Buellxb Forum

Help Support Buellxb Forum:

Kole_DeWoody

Well-known member
Joined
Jan 22, 2009
Messages
288
Let me know what you think. Its almost done only thing that is getting add are altimeter style caution stripes from 6.5k to 7k which is at the end of the yellow section and 7k starts at the red section on the tack.
Dash.jpg
 
That's awesome!

Too bad my bike doesn't say ODO - 005620

How difficult is it to swap the face plates out?
 
lol mine does not either anymore more like 18k something lol thats just his templete. It's pretty easy just take the cluster out there are a few srews on the back and it comes apart.
 
Thats flippin sweet would like a little more as far as numbers on both tach and speedo though
 
Yeah but i never really look down anyway. Except to just check my speed while cruising and there are enough numbers for that. And on the tack side there will be clearly marked redline at 6.5k when it gets redone.
 
Dear Mr. DeWoody, It brings me much sorrow and sadness to see your gaugeface devoid of our beloved country's stars and stripes, not even a hint of our great nations colors. respectfully Kalifornia. p.s. tell Andre howdy for me
 
i like them both top needs more numbers on speedo and tach. really like the american flag fitting for the BEST AMERICAN motorcycles like to see it with a bigger pegasus, and BUELL Firebolt XB12R.
 
I like the one that Acepilot put up that top one is a little plain, maybe black background? That might make it look a little better. I am just not big on the white. Good ideas though. :)
 
6030_20100311231724_L.jpg


This is the one I ordered last week. He customized it exactly how I wanted it. I think it looks pretty sweet. Will take pics when it arrives and I install it. (hopefully it wont be to difficult to remove my instrument cluster. Andre includes instructions but they are not for the firebolt model.)

-Joe
 
nemesis just pull the fairing you'll then see a bracket holding your headlights with two nuts on each side, dont remove them just loosen them and rotate said bracket down to expose the three nuts holding the ic. dont loose the washers. have someone hold the ic on a table while you use a fork instead of two spoons to remove the needles mine were on tight. the biggest pain is refitting the needles exercise extreme patience and of course before you put it back together plug in it and test the needle locations when you turn on the key.
 
Back
Top