Oil Cooling lines (HS0009.1AD)

[camiroj]

Hey Guys is been a while,

Chicago been under a polar vortex.... so no riding.
Finally getting some good weather and getting the bike ready for summer.

* Looks like I have a leak from the output line ( longer of the two). Seems like these line have a habit of rubbing and causing a leak.
-I think i found the right part number HS0009.1AD.
-I ordered a lightly used hose for a 2003 xb9. I have a 2006 xb12r..... will i have any problems with the switch?

* also any one who has swapped out these hoses before, anything i should look out for?

*Last question. Has any one made or bought any spacers to prevent future rubbing?


Thanks guys

 

[wolfo68]

The lines to the swingarm use different connectors. I also sold a set from an 03 to someone with an 05 for the oil cooler lines and he said the lengths weren't the same. I know for sure the fittings aren't set at the same angles.

 

[camiroj]

Thank for the reply.

I hope that not the case. I have a parts guy, that said HS0009.1AD will fit any XB model from 2002-2007.

Pic- its just the hose.... not any part of the kit.

Did your customer say how he fixed the problem?

 

[camiroj]

To add to this thread.

Has any one made new hoses, using rubber or metal?

I only have a crack in the mesh steel part of the hose.