Oil line to pump fitting??

[Hydrophilic]

So my Buell was having an oil leak that was coming from the feed oil line that runs from the swing arm to the oil pump. I ordered a replacement and was installing it and like a ******* the oil pump end rolled and snapped the fitting off at the threads. Now I have to get the old one out and find a new one. Any tips for getting it out and any idea on where to get the part? I didn't see a part number as I was looking through the manual. It's the small adapter that screws into the oil pump and the feed line.

 

[thrstrmech]

P/N: 26358-02A....Fitting, connector $3.81 newcastlehd.com

 

[WIGGLE2]

If you have access, a simple EZ-Out should back it right out. If required, drop the pump and put it in a vice with some padding and work on it. Make sure all is nice and clean before reinstalling it.