Parts cross reference thread

[christianmb]

I was just sitting here thinking that it would be helpful to have a thread to address parts cross references to help in a pinch. Here are a couple I've picked up off of here. I thought it would be nice to have a one-stop-shop:

Oil filter - 07+ Toyota Yaris 1.4L
Fuel pump (not assembly) - 03 Ford Mustang 3.8L - Walbro 521
Oxygen sensor - 87 Chevy 1/2 ton 4.3L - Bosch 12014
IAT - 97 Ford F-150 4.6L

If I'm wrong, please correct me. As Harley stops supplying these parts, it would help to know how to keep our bikes running.

 

[Stevenc150]

TPS sensor: Duralast #TPS213 ('93 Mustang) - Saves over $50 rather than HD sourcing-

Wheel bearings: SKF6006-2RS (Rear), SKF6005-2RS (Front)

More O2 sensors:

-GM OEM= 25162693
-NTK= 21002
-Airtex= 553071
-Bosch= 12014
-Denso= 234-1001
-Walker= 250-21001
-SNG= SN1-15



Great Idea BTW. Keep in mind if possible, support what Buell supporters still remain at that time by purchasing parts from them.

Example: American Sportbike, Buellparts.net, Buellsterparts.com, etc.

 

[christianmb]

Great Idea BTW. Keep in mind if possible, support what Buell supporters still remain at that time by purchasing parts from them.

Example: American Sportbike, Buellparts.net, Buellsterparts.com, etc.

^^[up]

 

[anrkizm95]

oil filters

ACDelco # UPF1233
Amsoil SDF10, EA009, EA010 (1/2”longer=more oil)
Bosch # 3311
Car Quest 85394
Champion # C138
Fram # PH4967
HD # 63806-004 or 00y?
HiFloFiltro #HF177
K&N # hp-1003, KN-177
Mighty # m4477
Napa # 1394
Mobil 1 # M1-103
Motorcraft # FL836
Penzoil # pz39
Purolator # L14476
STP # S4967
Valvoline # vo40
Wal-Mart Super Tech # ST49ST4967

o2 sensor

GM=25162693
NTK= 21002
Airtex= 553071
Bosch= 12014
Denso= 234-1001
Walker= 250-21001
SNG= SN1-15
Union Sangyo[OEM Toyota Mfg]#C-170.

Wheel bearings: SKF6006-2RS (Rear), SKF6005-2RS (Front)

IAT - 97 Ford F-150 4.6L

TPS sensor: Duralast #TPS213 ('93 Mustang)


fuel pump for a 03 musntang V6, part number E2366 at autozone XB fuel pumps are made by Walbro and are model #521

torca clamp o'rileys part# role20st.


plug thread M12 x 1.25mm Tap

chain conversion
Front sprocket(21 teeth); V-twin # 19-0384 / $13.97

Rear sprocket (51 teeth); (Odessa Fl.) # 827-51 / $63.95 + 6.95 shipping

530 diamond chain; V-twin # 19-0326 / $37.49

Idler pulley; Gates # 38023 / $16.78 (AND its available in ANY autozone in USA!)

Total cost: $139.14 (YES it IS less than the cost of ONE belt!!!!)

 

[2004xb12s]

Replacement bolts for the rear exhaust bracket
3/8-16 and get the 2 1/2 in bolts

 

[williegoat]

TPS for the tubers:
NAPA Part Number CRB 21918
O2 sensor is the same as the XB

 

[gunut75]

That chain conversion...............I just may order one so I have it when the belts get hard to find. Thats crazy cheap.........

 

[djohnk]

I just picked up that TPS213 at Autozone, and apparently Buell changed the position of the pins on the throttle body shaft ... it won't work for my '07 XB12X. Anyone know if there is a new p/n that works? I sure would like to saved $50.

 

[anrkizm95]

updated fuel pump numbers.

fuel pump for a 03 musntang V6, part number E2061 at autozone XB fuel pumps are made by Walbro and are model #521

 

[anrkizm95]

replacement starter #

HARLEY DAVIDSON 31390-91, 31390-91A, 31390-91B, 31390-86, 31533-81, 31391-91, 31391-91A
NIPPONDENSO: 128000-8450, 128000-8451

http://www.rareelectrical.com/p-960...b9s-lightning-xb12r-xb12s-xb12xt-ulysses.aspx

 

[JOEL9]

I'm gonna add this to the thread:

'08+ XB tps sensor, Duralast, can get at autozone or most auto parts stores. used on BMW's, cars & bikes. mine was $80.00 @ autozone. easy to install, you will need a super small 7mm wrench

 

[thrstrmech]

An update on Gates Idler Pulley #38023...not available at Autozone...available at O'Reilly's, but it's NOT the correct part at all...this is what it turned out to be

Gates #38023

it is way too small and has only a single bearing in it

 

[crxtasy169]

Great thread love it!

 

[thrstrmech]

my bad...it's correct for chain conversion, was looking for a replacement OE pulley, palm to forehead

 

[lightning SS]

Great thread [up] Im gonna do a chain conversion

 

[konarider94]

was looking for a replacement OE pulley, palm to forehead

you can change the bearings in the pulley
they are 6203-2RS

 

[thrstrmech]

had to replace the entire pulley...pics are kinda fuzzy, but you can see that the coating was coming off and the bearings were toast when I rolled it across the bench top, got a replacement from Buellsterparts.com

 

[thrstrmech]

alrighty... a new P/N for you guys doing the front end conversions on your bikes...headlight harness connectors:

male connector...P/N: 73154-96WE
female connector...P/N: 73104-96BK

both are the OEM 4 position connectors....BEWARE the female connector P/N will also come up as a 3 position connector under some searches, your local HD dealer can order 'em MSRP $1.99 ea, but you can get 'em cheaper through Kutterharleydavidson $1.24 ea, newcastleharleydavidson $1.50 ea...when you order, confirm it's the 4 position connector(s)

this would make it more plug n' play rather than hacking up what's already there and having to splice in new blade or bullet connectors, just my 2 cents

 

[xb12rs]

Great thread. Will be using the fuel pump info myself.

 

[RichP99]

some good info here... maybe Sticky in DIY or Parts Guy Questions area?