right side air scoop for Buell

[LeFox]

ok...for the others that want some more info...

a prototype for the 2008 XB model is in test-phase (headers are higher, thus there's no room for the rh airscoop in original shape)

good info is that this scoop would also fit the older models with micron exhaust system! [up]

 

[speedybuell]

Let me know when you finish the 2008 intake, I am definitly interested in buying one! [email protected]

 

[whitefirebolt9r]

i have a 2003 xb9r and i was wondering if the carbon fiber right scoop will fit my bike. there is a bar that connects to the frame and the engine. it is behind the front header, but i am wondering if you have to modify the airscoop to go around this rod.

 

[whitefirebolt9r]

the xb12r does not have this rod

 

[XBear9S]

Whitefirebolt9r,

Your '03XB9 should be the same as mine and the one I got from ASB fit not problem. I would say that you should look for a specific year/model type when purchasing. And you should look to see what people are recommending.

I was pretty glib w/my carbon right side scoop till I got to really look @ it. Its shape is all wrong and I think I'll either be ditching it, or may be looking into replacing it with another.

Live and learn...

Robtk! a.k.a. "SpecialK!"

"In space, no one can hear you wheelie."
Ridley "Buellalien" Scott

 

[LeFox]

i have a 2003 xb9r and i was wondering if the carbon fiber right scoop will fit my bike. there is a bar that connects to the frame and the engine. it is behind the front header, but i am wondering if you have to modify the airscoop to go around this rod.

except for the 2008 models, there should be no problem fitting a rh airscoop.
the 2008's front header is situated higher than previous models. (this is also the case with micron headers).

 

[whitefirebolt9r]

i was gunna get one from a guy parting his buell off on this site but its off a xb12 and i dont want to take a risk. i dont need it. ill just get a jardine exhaust. lol.

 

[whitefirebolt9r]

thanks for the advice though.

 

[LeFox]

update...2008 model is out now!

[up]

 

[xbhooligan434]

damnthats gorgeous i like how these scoops look like they are stock other than the other carbon ones that are smaller than the stock ones this evens out the look looks beautiful

 

[dans03firebolt]

That does look great but I can't see the 500 degree heat from the pipe not melting that thing. But they did the research on it so it must not melt. They do even out the look the of the bike how Buell didn't do this from the factory is retarded.

 

[LeFox]

for those interested...

because the dollar isn't doing too good at the exchange, i have a temporary settlement with the manufacturer to get a 10€/scoop discount.



saddly, this is an offer which i can only extend to the the people in the u.s.

 

[dans03firebolt]

Can you let us know what that means LeFox? How much would it cost us in the states to get this scoop?

 

[LeFox]

mail me with your location and i'll send it to you...

 

[mcanavan69]

Can I get info on the RH scoop for a 2003 XB9S
Thanks

 

[LeFox]

Can I get info on the RH scoop for a 2003 XB9S
Thanks

if you can mail me your location...i can give you the complete info

 

[nitto12ss]

LeFox, I have a 2006 Xb12ss and am interested in the rh airscoop, and was wondering if it will fit my bike and if so what it would cost to ship it to CA.
Tx.

 

[LeFox]

could you mail me, so i can reply with all details? thx

 

[nitto12ss]

LeFox
[email protected]
Tx.

 

[LeFox]

LeFox
[email protected]
Tx.

mail