-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Side-stand fasteners got loose
- Thread starter Yan
- Start date
Help Support Buellxb Forum:
user_deleted
Well-known member
agree with mart but every stock buell i've ever seen leave the factory has the front muffler clamp stud facing shifter side and rear 2 clamp studs facing pulley side. i've found it incredibly difficult to remove the 2 rear ones without removing the pulley though i know it can be done. if you choose to remove the pulley takes about 5 minutes and very simple. remove pulley cover (3 screws non-interchangeable), remove rear axle pinch bolt, loosen rear axle 20 full turns and 20 ONLY, then remove 2 pulley stud nuts (interchangeable) and tug and wiggle pulley. comes right off allowing much easier access to the 2 rear clamp studs and nuts. just a thought.
Similar threads
