** Stranded! @coffee shop, help**

[buelljek]

07 12r 4k.
Well me and the mrs. went for coffee, bike ran perfect. Drink a cup of coffee and go to start bike but the lights won't come on and the dash only shows the red oil light and green neutral light? Doesn't even try turning over, push starter and silence.. So I check all the fuzes on the right side and all are good. Of course the ones on the left are not clear but I started swapping them around, got the lights to come on and engine to turn but no start? Is it one of these grey 5-prong fuzes or what am looking at here? Thanks! Jek

 

[Thaloc]

Do you hear the fuel pump priming?

 

[sparky300]

Fuel pump relay?

 

[konarider94]

the 5 prongers are relays. try tapping them one might be stuck. sounds like one of them went bad(or at least temporarily stuck) if swapping them around creates different results.

 

[buelljek]

Well don't believe it's fuel pump if the starter didn't try and turn? It must be one of the relays? Do they go bad and where can I get one?

 

[buelljek]

Got a ride home, went back and trailered it home. Gonna screw with it tomorrow :/ btw fellas know where I could find another relay? Thanks

 

[dave_xb12r]

Sounds like the kill switch is corroded.

 

[GOduc]

Had the starter relay @ autozone when I needed one.

 

[buelljek]

Thanks guys. It appears that all the relays are the same? So if they have one they got em all, right?
I am pretty sure the relays are my problem, or atleast Iam really hoping so, that would be an easy fix- plug and chug. Hopefully I'll get it so I don't have to take to (Hardley A Motorcycles!)

 

[buelljek]

Relay was the issue, here two different parts that work from napa.

[/img]
Thanks for the advice fellas! Good luck, btw I replaced all for $22.00

 

[sparky300]

Awesome! Glad we could help. Prob would be a good idea if I kept a spare on board, given that they're only $11, beats being broke down beside the road.

 

[buelljek]

Actually Sparky they are $6 something.... Replaced all three, however I narrowed it down to one I am still keeping 2 extra onboard would be a wise decision IMHO

 

[bigflash1]

Great idea. Will either of these PN's work?
And this thread needs to get shifted into the Part Number cross reference section!

 

[Rebel_CafeRacer]

that sucks man! Hope it doesnt leave you stranded again!

 

[christianmb]

Got it bigflash!

 

[buelljek]

Yes both numbers work, they look almost identical. One is dark gray, other is light? Lol. I believe the one in the black box is more expensive?$1 maybe, they are supposed to be "better" or something but napa only had two so just settled for one cheaper one. Hope this helps somebody out someday.......