• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Throttle cables

Buellxb Forum

Help Support Buellxb Forum:

rb70383

Well-known member
Joined
Jul 4, 2008
Messages
482
The adjuster on the grip end broke off as the physics law still stands that only one thing can occupy a given space at any one time. St Paul has all the cables except 03-07 XBR. Did i miss something? Are these no longer available? It would figure I find out after I break it.
 
Both my cables was worn so i bought wire from a bicycle store in same dimension as stock 1,2mm. One end already had a nipple in correct dimension so i bought a screw nipple and filled with solder in combination with the screw. Worked fine and costed about 7$. Just another solution that might work.
 
Back
Top