buellman09
Well-known member
- Joined
- Sep 10, 2009
- Messages
- 226
Just wanted to apologize for what I said above. It wasnt cool by any means. Too much help on here to be like that. Once again sorry.
Tunerpro ????
- Thread starter buellman09
- Start date
Help Support Buellxb Forum:
Got the stock map from the other 1125, it's an old flash though. Bike still has the Rev A clutch puck and internals even, so it hasn't been touched by a dealer in a couple of years. Haven't had time to mess with it yet.
At any rate, this is from a pre-programmed race ecm. Date on it shows the same as one of the last factory flashes, no real indication that it's a "race" ecm except for the actual engraving on the side of it. I've also got a stock ecm with a race flash on it from June of last year, I need to grab that one also and then start sorting data. Once I have a good idea of where it's at (already saw some differences between the stock and race one) then I'll do the data log stuff. After that, wideband data logs.
At any rate, this is from a pre-programmed race ecm. Date on it shows the same as one of the last factory flashes, no real indication that it's a "race" ecm except for the actual engraving on the side of it. I've also got a stock ecm with a race flash on it from June of last year, I need to grab that one also and then start sorting data. Once I have a good idea of where it's at (already saw some differences between the stock and race one) then I'll do the data log stuff. After that, wideband data logs.
theoctopus
Well-known member
- Joined
- Jul 22, 2009
- Messages
- 2,101
No. Tunerpro can be used for all FI Buells.
