• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Two wires on the rear seat

Buellxb Forum

Help Support Buellxb Forum:

Rwhitexb12r

Member
Joined
Nov 25, 2015
Messages
6
Location
Atlanta, GA
I've been told that these two wires were for an anti-vibration system for the passenger. I am skeptical to say the least. Any insight into the truth ?
 
what year bolt do you have? I have a 07 bolt and that is not on my bike. Never heard of a anti-vib system in rear seat.
 
the staples shown in the pic are not the factory ones. look closely at the pattern. i suspect somebody removed the seat cover...bought themselves a "heated seat kit"...and had the installation done. betting if you strip a bit of insulation off each wire and hook the red to a 12-volt positive source and white to negative source and wait a few minutes you'll feel warmth on the seat cover. just a hunch
 
Now i've seen everything. Pretty sure you don't need a viberider on a Buell.
 
Back
Top