Gave the bike a scannable paint theme.
What did you do for your Buell today?
- Thread starter Sirius815
- Start date
Help Support Buellxb Forum:
Gave the bike a scannable paint theme.
chief_of_smoke
Well-known member
how did you do the gauge cluster. i like that. i just got done with the led volt gauge in the cluster, intalled hid lights, and put on a buell tank bag. it was the very last one in the harley system.
Have a scan! It's the same QR I used on the flyscreen. It looks like the shiny spots make it hard to scan in the pictures.
Here's the link to the dash build up Chief:
Dash Build Up
I pointed it back to this page just for you. I still have to finish up the bikes mobile site yet. So I'll leave it pointed here for a short time until its done.
I'm glad you like the dash, I get a lot of questions from all kinds of bikers about it. There's still 2 kinks to work out on the indicator lights. Then I need to blend the style of the tach and lights together for a unified theme.
grasshoppa
Active member
- Joined
- Feb 22, 2013
- Messages
- 38
I spent all last night and most of this morning trying to get my ecmspy cable to communicate with my bike. finally given up. Everything was loaded correctly but no throttle response . COM port failed. Ive already read everything went through all the steps to set com port up and nothing.
grasshoppa
Active member
- Joined
- Feb 22, 2013
- Messages
- 38
In advanced settings its showing com3 (in use) so i changed it to com1 . go out to bike with the cable plugge into my laptop. turn ign on, turn run button on , attach cable to bike start ecmspy hit connection button . nothing comes up in drop down box so i hit autodetect . Then it tells me to repeat all the steps i just performed i hit the ok button and then com port failed.
I AM LOSING MY MIND HERE
I AM LOSING MY MIND HERE
greasyxb9s
Well-known member
- Joined
- Oct 22, 2012
- Messages
- 620
Grasshoppa where did you get your cable? I just went through this this past weekend and my cable worked fine before.
Pull the end apart that plugs into bike. I'd be willing to bet that they aren't soldered to the pins and aren't connecting. Thank rchuff for this advice.....
Pull the end apart that plugs into bike. I'd be willing to bet that they aren't soldered to the pins and aren't connecting. Thank rchuff for this advice.....
Pipe is hooked up and started right up! I need to put a 12 base or race map in it (any body have a race map?) in it. Finish booking up a few things. Then it hits the Dyno for break in and tune.
I'm still unsure about the silver. I thought it was going to be like dull chrome.
I'm still unsure about the silver. I thought it was going to be like dull chrome.
grasshoppa
Active member
- Joined
- Feb 22, 2013
- Messages
- 38
got my cable off amazon . thanks greasy i will try that
Josh662234
Well-known member
- Joined
- Dec 22, 2011
- Messages
- 358
made a spring compressor and swapped out springs . . blue to black [up]
Start up video, as you can hear it idles little rough needs 12 fuel and tune, hot tps reset, and timing set.
http://www.youtube.com/watch?v=3gww8cUrpo4
http://www.youtube.com/watch?v=3gww8cUrpo4
neilrl79
Well-known member
Most of the stuff I need to make my own Bluetooth ECMSpy cable arrived today! It seems pretty straight forward. Need to snag some wire from work tomorrow and get to soldering. Got this for less than $30. I'll take pics and stuff so if it works(it should) I'll do a write-up on it.
DrogeN Omen
Well-known member
a mate of mine modified my factory spare muffler and created this 90Ci imitation 
put it on the bike took her for a lengthy spin and am extremly impressed.
no more flat spots in my rev range, better acceleration.
put it on the bike took her for a lengthy spin and am extremly impressed.
no more flat spots in my rev range, better acceleration.
Mounted a pair of 3W projection led's for my stop light...
http://www.buellxb.com/Buell-XB-Forum/Buell-Lightning-XB12S-XB12Ss-CityX-XB12Scg/Custom-stoplight
http://www.buellxb.com/Buell-XB-Forum/Buell-Lightning-XB12S-XB12Ss-CityX-XB12Scg/Custom-stoplight
Similar threads
