• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Why won't he work after wreck?

Buellxb Forum

Help Support Buellxb Forum:

DietSlinger

Well-known member
Joined
Nov 29, 2011
Messages
145
So I have almost everything together and just waiting to get a few last minute things before I have the swing arm replaced.

Before I removed the exhaust and reinstalled the switch housing the bike would just click like it wasn't getting fuel but at least attempted to start. Now it will not even do that. Did the throttle tension back to normal but still have not put on the exhaust.

Would any of these redesigns be why it won't even click when ignition is hit?

Trying to make sure I don't have any other problems before I take it in.

Thanks for all help.
 
ECM reads battery at 11.8 currently. Fuel pump primes. Get all normal readings only cel code is active muffler control which has always been normal.
 
Battery should read over 12VDC if you see voltage drop below 12 VDC, you have to charge the battery, or a ground issue, or bad electical connection period. you may have enough current have lights or to prime the fuel, but not enough amps to turn over the bike.
 
Update on bike.

Now running better than ever and looking great. Want to thank everyone that helped with parts and answering questions.

45D88A41-6DCA-490A-94D9-828246808E60-11319-0000103303487E31_zpse1012518.jpg


AFDC4FFB-B0D5-4C50-B227-127A67F4AADC-11319-000010332E057FE0_zps847b76cf.jpg


A8B196FD-1CFD-44B0-8113-7531331B4517-11319-00001033113FBDF9_zpsfb447eeb.jpg


One more question though
The throttle won't return after it is pulled. Wondering what I could do to fix it? But I like the cruise control option.

Thanks 50 dro for hooking up the case sliders and picked up a set of axle sliders as well.

Love the d and d exhaust sounds amazing has more power and runs better than with the jardine did.
Thanks Squid for the parts and talking with me regarding insurance.
Crossroad bars are nice different position for me but like the more aggressive stance.

Back on the challenges as soon as the cold weather ones end.
Rude safe and gear up. That is all that saved my life when I wrecked at 70 mph.
 
You have to route the cables just right with the crossroads or it will bind. Can you take a picture
 
I loosened the front modules and ran the cable between them and the forks. That angle is no bueno
 
Nice I will look at it tomorrow and see what I can resolve. Thanks for the advice. I was going to put a little grease under the throttle tube thinking it may be sticking. Although when I had the bars off it didn't seem to be retracting either. Tomorrow we will know.
 
Back
Top